Loading Paper into the Small Size Paper Tray
This section describes how to load paper into the small size paper tray.
Check the paper edges are aligned at the right side.
Carefully pull out the paper tray until it stops.
Square the paper and load it print side up.
Do not stack paper over the limit mark.
Carefully push the paper tray fully in.
When loading a low number of sheets, be sure not to squeeze the side fences in too tightly. If the paper bows, it might not feed in properly.
If a paper tray is pushed vigorously when putting it back into place, the position of the tray's side fences may slip out of place.
Various sizes of paper can be loaded in the small size paper tray by adjusting the positions of side fences and end fence. For details, see “Changing the Paper Size in the Small Size Paper Tray”.
You can load envelopes in the small size paper tray. For details about how to load envelopes, see “Changing the Paper Size in the Small Size Paper Tray”. For details about various details about and recommendations concerning envelopes, see “Envelopes”.
The small size paper tray can hold up to 550 sheets.
For details about how to install the small size paper tray, see “Installing the Small Size Paper Tray”.
