Skip headerPro C901
ManualsContentsPreviousNextHelp

Top Page > Troubleshooting > When the Machine Does Not Operate As Wanted > When Large Size Paper Is Not Properly Aligned > Booklet Finisher SR5020

Booklet Finisher SR5020

This section describes what to do if paper larger than B4 JIS or 81/2" × 14" is not properly aligned or falls from the finisher shift tray when using Booklet Finisher SR5020.

  1. Press the [Suspend/Resume] key.

    The key lights up.

    Finisher illustration

  2. Remove the prints.

  3. Pull out the finisher shift tray's extension.

    Finisher shift tray illustration

  4. Set the auxiliary paper tray.

    Finisher shift tray illustration

  5. Press the [Suspend/Resume] key.

    The key turns off, and then printing restarts.

TopPreviousNext
Copyright (C) 2010