Registering Frequently Used Functions

You can store frequently used copy job settings in the machine memory and recall them for future use.

You can store up to 10 programs.

When a specified program is registered as the default, its values become the default settings, which are displayed without pressing the [Program] key, when modes are cleared or reset, and after the operation switch is turned on. See “Changing the Default Functions of the Copy's Initial Display”.
Stored paper settings are based on paper size. If multiple trays holding paper of the same size are installed, the paper tray that is prioritized in the system settings will be selected first. See “System Settings”, Network and System Settings Reference.
Programs are not deleted by turning the power off or by pressing the [Clear Modes] key.