Manuals
Contents
Previous
Next
| | | |
| |||
| |||
| | | |
| ManualsContentsPreviousNext | | |
The machine automatically detects the original size and then selects an appropriate reproduction ratio based on the paper size you select.
You cannot use the bypass tray with this function.
This is useful to copy different size originals to the same size paper.
To ensure the print result you require is produced, specify the original orientation before using Auto Reduce / Enlarge.
The paper sizes and orientations you can use with this function are as follows:
Engineering
E (34 × 44)
, D (22 × 34)
, C (17 × 22), B (11 × 17), A (81/2 × 11)
Architecture
E (36 × 48), D (24 × 36), C (18 × 24), B (12 × 18), A (9 × 12)
Others
30 × 21, 30 × 42
Press [Auto Reduce / Enlarge].
Select the paper size.
The machine selects one of the following ratios:
Engineering
400.0%, 258.8%, 200.0%, 129.4%, 100.0%, 64.7%, 50.0%, 32.4%, 25.0%
Architecture
400.0%, 266.7%, 200.0%, 133.3%, 100.0%, 66.7%, 50.0%, 33.3%, 25.0%
Make sure that the original orientation setting matches the actual orientation of your original. For details, see “Original Orientation”.
 |
 | Copyright (C) 2010 |
