Setting the Length of Copy Paper Cut

Specify the length to cut the paper loaded in the paper roll tray.

You cannot cut the paper in the bypass tray.

The following paper cut methods are available:

Synchro Cut

Cuts the paper at the same length as the original. If the copy is enlarged or reduced, the machine calculates the appropriate length for the magnification ratio and cuts the paper.

Preset Cut

Cuts the paper at a preset size, regardless of the size of the original. You can use this to copy different sized originals to the same size.

Variable Cut

Cuts the paper to the size entered.

The minimum cut length is 280 mm (11 inches), and the maximum length is 15000 mm (590.5 inches) for plain paper of 841 mm (34 or 36 inches) or more in width. For other paper, the maximum length is 3600 mm (141.8 inches). If the length you specify exceeds the maximum, the paper will be fed in at a slant, resulting in poor copy quality and wrinkled paper.