Exterior: Front View

Standard Paper Feed Tray (Tray 1)

Up to 550 sheets of plain paper can be loaded.

The Remaining Paper Indicator

Indicates the approximate amount of paper remaining in the tray.

Bypass Tray Extension

Pull this out when loading a sheet that is larger than A5 on the bypass tray.

Bypass Tray

Up to 100 sheets of plain paper can be loaded.

Front Cover

Open the front cover to replace the fusing unit or transfer roller, or to remove jammed paper.

Control Panel

Contains keys for printer control and a display that shows the printer status.

Standard Tray / Top Cover

Under normal operation, output is stacked on the top cover, which works as the standard output tray. Open this cover to replace the toner.

Front Cover Open Levers

Pull these levers toward the front side of the printer to open the front cover.

Vents

The right side of the printer features two vents. To prevent overheating, heat from internal components is released through these vents. Malfunctions and failure can result if these vents are blocked or obstructed.

The dustproof filter needs to be replaced regularly for proper maintenance.

Replace the dustproof filter when the following message appears:

• "Replcmnt Rqrd:Fusing Unit"

Replace the dustproof filter and the fusing unit together.

Paper Feed Roller

This ensures only one sheet of paper is fed in at a time. If multi-sheet feeds occur, clean the paper feed roller carefully.