Skip header
 

Top Page > Hardware Guide > Removing Misfed Paper > Paper Misfeed Message (Z)

Paper Misfeed Message (Z)

The "iconco2.120.gif(Z) Open Frt. Cov and remove paper in Dup.Feed." error message appears when a paper misfeed occurs inside the duplex unit.

CAUTION

  • Some of this machine'e internal components get very hot. For this reason, take care when removing misfed paper. Not doing so could result in burns.

Important

  • The inside of this printer becomes very hot. Before removing paper from the area around the fusing unit, wait until both the fusing unit and the duplex unit have cooled down.

  • If a paper misfeed occurs in the duplex unit, open the front cover to remove the misfed paper.

1Carefully open the printer's front cover by pulling the left and right side levers.

Printer illustration

2Tilt the duplex unit backward by carefully raising its front end.

Printer illustration

3Carefully remove misfed paper.

Printer illustration

4Carefully close the front cover.

Note

  • When closing the front cover, push the upper side of the cover firmly. After closing the cover, check that the error has cleared.