Skip header
 

Top Page > Hardware Guide > Paper and Other Media > Paper Recommendations > Types of Paper and Other Media > Waterproof Paper

Waterproof Paper

Printer setup

Press the [Menu] key, select [Paper Input], [Paper Type: (tray name)], and then select [Waterproof Paper].

Printer driver setup

Click [Waterproof] in the "Paper Type:" list.

Supported paper feed tray

Any input tray can be used.

Make sure paper is not stacked higher than the upper limit mark (Down arrow key ) inside the tray. When using the bypass tray, make sure paper is not stacked higher than the paper guides on the bypass tray.

Duplex printing

Not supported

Maintenance

Default: [Waterproof Paper 5]

If prints made using the paper tray show heavy smudging, use the following procedure to change the paper type setting from the control panel:

  • Press the [Menu] key, select [Maintenance], [General Settings], and then select [Waterproof Paper Setting]. Select the paper tray, and then select one from [Waterproof Paper 1], [Waterproof Paper 2], [Waterproof Paper 3], [Waterproof Paper 4], or [Waterproof Paper 5].

When specifying paper thickness, remember that a higher number indicates greater thickness. Also, because the paper thickness will normally be detected automatically, change this setting only if a print problem occurs.