Basic Operation in Printer Mode
The following procedure explains how to perform basic printing.
Open the printer properties dialog box in your document's application.
Set printing options as necessary, and then click [OK].
The printer properties dialog box closes.
Click [OK].
You can select the priority tray using the [Tray Priority] setting under [PDL Settings].
If a paper jam occurs, printing stops after the current page has been printed out. After the jammed paper is removed, printing restarts from the jammed page automatically.
After printing on envelopes, make sure to raise the levers for printing on envelopes back to their original positions. Leaving the levers lowered can cause print quality problems when printing on paper other than envelopes.
For details about accessing the printer properties, see Accessing the Printer Properties from an Application
.For details about [Tray Priority], see PDL Settings
.For details about how to remove the jammed paper, see Removing Printing Jams
.For details about the levers for printing on envelopes, see Loading envelopes
.
