Skip headerimage
ManualsContentsPreviousNextHelp

Manual Dial

Pick up the handset of the external telephone and dial. If you hear a voice at the other end, continue conversation as normal.

Important

  1. Place the original, and then select the scan settings you require.

  2. Pick up the handset.

    You will hear a dial tone.

  3. Dial.

    Operation panel screen illustration

    The machine immediately dials the destination.

    If you make a mistake, replace the handset, and then try again from step 2.

  4. When the line is connected and you hear a high-pitched tone, press the [Start] key to send your fax document.

    If you hear a voice, tell the receiver that you want to send them a fax document (ask them to switch to facsimile mode).

    Transmission starts.

  5. Replace the handset.

    If you want to cancel a transmission, press the [Clear/Stop] key, and then remove the originals.

    After transmission, the standby display appears.

Note

Reference