![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
This section describes how to change the paper size.
|
Do not stack paper over the limit mark.
Be sure to select the paper size with User Tools. If you do not, misfeeds might occur. For details about Tray Paper Size, see "System Settings", Network and System Settings Reference.
Tray 1 and the LCT use only 81/2 × 11 paper. If you want to load A4
into Tray 1, or load A4
or B5 JIS
into the LCT, contact your service representative.
The optional extension unit is required to load B4 JIS, A4
, 81/2 × 14
, or 81/2 × 11
into the LCT.
Fan the paper before loading.
Straighten curled or warped paper before loading.
For details about paper sizes and types, see "Recommended Paper Sizes and Types".