![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
This section describes the user tools in the User Stamp menu under Stamp.
Program / Delete Stamp
You can register, change, or delete user stamps.
You can register up to four custom stamps with your favorite designs.
For details about how to program the user stamp, see "User Stamp".
The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.
Stamp Format:1-4
Specify how each of registered user stamps 1 to 4 is printed.
Stamp Position
Specify where to print the user stamp.
Default: [Top Right]
Adjust Stamp Position
You can adjust the position of the user stamp within the available ranges shown below.
Metric version:
"Top Left" - T/B: 4 - 144 mm, L/R: 4 - 144 mm
"Top Center" - T/B: 4 - 144 mm, L/R: 72 - 72 mm
"Top Right" - T/B: 4 - 144 mm, L/R: 4 - 144 mm
"Center Left" - T/B: 72 - 72 mm, L/R: 4 - 144 mm
"Center" - T/B: 72 - 72 mm, L/R: 72 - 72 mm
"Center Right" - T/B: 72 - 72 mm, L/R: 4 - 144 mm
"Bottom Left" - T/B: 4 - 144 mm, L/R: 4 - 144 mm
"Bottom Center" - T/B: 4 - 144 mm, L/R: 72 - 72 mm
"Bottom Right" - T/B: 4 - 144 mm, L/R: 4 - 144 mm
Inch version:
"Top Left" - T/B: 0.1 - 5.7 inches, L/R: 0.1 - 5.7 inches
"Top Center" - T/B: 0.1 - 5.7 inches, L/R: 2.8 - 2.8 inches
"Top Right" - T/B: 0.1 - 5.7 inches, L/R: 0.1 - 5.7 inches
"Center Left" - T/B: 2.8 - 2.8 inches, L/R: 0.1 - 5.7 inches
"Center" - T/B: 2.8 - 2.8 inches, L/R: 2.8 - 2.8 inches
"Center Right" - T/B: 2.8 - 2.8 inches, L/R: 0.1 - 5.7 inches
"Bottom Left" - T/B: 0.1 - 5.7 inches, L/R: 0.1 - 5.7 inches
"Bottom Center" - T/B: 0.1 - 5.7 inches, L/R: 2.8 - 2.8 inches
"Bottom Right" - T/B: 0.1 - 5.7 inches, L/R: 0.1 - 5.7 inches
Page to Stamp
Sets whether to print the stamp on all pages or only the first page.
Default: [All Pages]
The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.
Stamp Color: 1-4
Sets the priority of the colors selected for user stamp (1 to 4).
Default: [Black]
The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.