![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
This section describes the user tools in the Preset Stamp menu under Stamp.
Stamp Language
You can select the language of the message printed in Stamp mode.
English, German, French, Italian, Spanish, Dutch, Portuguese, Polish, Czech, Swedish, Finnish, Hungarian, Norwegian, Danish, Russian, Japanese, Simplified Chinese, Traditional Chinese, Hangul, Catalan, Turkish
Default: [English]
The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.
Stamp Priority
You can select the stamp type given priority when [Preset Stamp] is pressed.
Default: [COPY]
The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.
Stamp Format
Specify how each of stamp is printed.
Stamp Position
Specify where to print the stamp.
Default: [Top Right]
Adjust Stamp Position
You can adjust the print position of the stamp within the available ranges shown below.
Metric version:
"Top Left" - T/B: 4 - 144 mm, L/R: 4 - 144 mm
"Top Center" - T/B: 4 - 144 mm, L/R: 72 - 72 mm
"Top Right" - T/B: 4 - 144 mm, L/R: 4 - 144 mm
"Center Left" - T/B: 72 - 72 mm, L/R: 4 - 144 mm
"Center" - T/B: 72 - 72 mm, L/R: 72 - 72 mm
"Center Right" - T/B: 72 - 72 mm, L/R: 4 - 144 mm
"Bottom Left" - T/B: 4 - 144 mm, L/R: 4 - 144 mm
"Bottom Center" - T/B: 4 - 144 mm, L/R: 72 - 72 mm
"Bottom Right" - T/B: 4 - 144 mm, L/R: 4 - 144 mm
Inch version:
"Top Left" - T/B: 0.1 - 5.7 inches, L/R: 0.1 - 5.7 inches
"Top Center" - T/B: 0.1 - 5.7 inches, L/R: 2.8 - 2.8 inches
"Top Right" - T/B: 0.1 - 5.7 inches, L/R: 0.1 - 5.7 inches
"Center Left" - T/B: 2.8 - 2.8 inches, L/R: 0.1 - 5.7 inches
"Center" - T/B: 2.8 - 2.8 inches, L/R: 2.8 - 2.8 inches
"Center Right" - T/B: 2.8 - 2.8 inches, L/R: 0.1 - 5.7 inches
"Bottom Left" - T/B: 0.1 - 5.7 inches, L/R: 0.1 - 5.7 inches
"Bottom Center" - T/B: 0.1 - 5.7 inches, L/R: 2.8 - 2.8 inches
"Bottom Right" - T/B: 0.1 - 5.7 inches, L/R: 0.1 - 5.7 inches
Size
You can set the size of the stamp.
Default: [1 X]
Density
You can set the pattern used to print the stamp.
Default: [Normal]
Normal
The stamp is printed on the image. You cannot check which parts will overlap.
Lighter
The image can be seen through the stamp.
Lightest
The image appears even clearer than in the Lighter setting.
Page to Stamp
You can have the stamp printed on the first page or all pages.
Default: [All Pages]
The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.
Stamp Color
Sets the stamp print color.
Default: [Black]
The main machine applies the settings that have been made on it. Sub-machines also apply the settings made on the main machine, regardless of the settings made on them.