Registering an NCP Folder

Press [System Settings].

Press [Administrator Tools].

Press [Address Book Management].

Check that [Program / Change] is selected.

Press the name you want to register or enter the registered number using the number keys.

You can search by the registered name, fax number, folder name, e-mail address, or IP-Fax destination.

Press [Auth. Info], and then press [Next].

Press [Specify Other Auth. Info] under "Folder Authentication".

When [Do not Specify] is selected, the NCP User Name and NCP Password that you have specified in Default User Name / Password (Send) of File Transfer settings applies. For details, see "File Transfer".

Press [Change] under "Login User Name".

Enter the login user name, and then press [OK].

Press [Change] under "Login Password".

Enter the password, and then press [OK].

Enter the password again to confirm, and then press [OK].

Press [Folder].

Press [NCP].

Select "Connection Type".

If you want to specify a folder in an NDS tree, press [NDS]. If you want to specify a folder on a NetWare server, press [Bindery].

If you have set "Connection Type" to [NDS], enter the user name followed by the name of the context where the user object is located. If the user name is "user" and the context name is "context", enter "user.context".

Specify the path.

For details about how to specify the path manually, see "Locating the NCP folder manually".

For details about how to specify the path using Browse Network, see "Locating the NCP folder using Browse Network".

Press [Connection Test] to check the path is set correctly.

Press [Exit].

Press [OK].

Press [Exit].

Press the [User Tools/Counter] key.