Skip header
ManualsContentsPreviousNextHelp

Setting Up as a Remote Printer (NetWare 4.x, 5 / 5.1, 6 / 6.5)

Follow the procedure below to use the printer as a remote printer under NetWare 4.x, 5 / 5.1 and 6 / 6.5.

Important

Setting up using NWadmin

  1. From Windows, start NWadmin.

    For details about NWadmin, see the NetWare manuals.

  2. Set up the network connection to a print queue. Select the object in which the print queue is located in the directory tree, and then click [Create] on the [Object] menu.

  3. In the [Class of new object] box, click [Print Queue], and then click [OK].

  4. In the [Print Queue Name] box, enter the name of the print queue.

  5. In the [Print Queue Volume] box, click [Browse].

  6. In the [Available objects] box, click the volume in which the print queue is created, and then click [OK].

  7. Check the settings, and then click [Create].

  8. Set up the network connection to a printer. Select the object in which the printer is located, and then click [Create] on the [Object] menu.

  9. In the [Class of new object] box, click [Printer], and then click [OK]. For NetWare 5, click [Printer (Non NDPS)].

  10. In the [Printer name] box, enter the printer name.

  11. Select the [Define additional properties] check box, and then click [Create].

  12. Assign print queues to the created printer. Click [Assignments, and then click [Add] in the [Assignments] area.

  13. In the [Available objects] box, click the queue you created, and then click [OK].

  14. Click [Configuration], click [Parallel] in the [Printer type] list, and then click [Communication].

  15. Click [Manual load] in the [Communication type] area, and then click [OK]. Check the settings, and then click [OK].

  16. Set up the network connection to a print server. Select a context specified, and then click [Create] on the [Object] menu.

  17. In the [Class of new object] box, click [Print Server], and then click [OK]. For NetWare 5, click [Print Server (Non NDPS)].

  18. In the [Print Server Name:] box, enter the print server name.

  19. Select the [Define additional properties] check box, and then click [Create].

  20. Assign the printer to the created print server. Click [Assignments], and then click [Add] in the [Assignments] area.

  21. In the [Available objects] box, click the queue you created, and then click [OK].

  22. In the [Printers] area, click the printer you assigned, and then click [Printer Number].

  23. Enter the printer number, and then click [OK]. Check the settings, and then click [OK].

  24. Start the print server by entering the following from the console of the NetWare server.

    If the print server is in operation, quit and restart it.

    To exit

    CAREE: unload pserver

    To start

    CAREE: load pserver print_server_name

  25. Enter the printer server name as the context name, and then press the [Enter] key.

  26. Select the printer name on the context menu, and then press the [Enter] key.

Setting up using Web Image Monitor

  1. Start Web Image Monitor.

  2. Click [Login].

    A dialog box for entering the login user name and login password appears.

  3. Enter the user login name and password, and then click [Login].

    For details about the login user name and password, consult your administrator.

  4. Click [Configuration] in the left area, and then click [NetWare Print Settings].

  5. Confirm the settings, and then click [Device Name].

    Configuration is now complete. Wait several minutes before restarting Web Image Monitor.

  6. Click [Logout].

  7. Quit Web Image Monitor.

Note

Reference