Using NetWare

This section describes the setting procedure for network printers in the NetWare environment. In the NetWare environment, you can connect the printer as a "print server" or "remote printer".

IPv6 cannot be used on this function.

Setting procedure

When using the printer as a print server
1. Install the network interface board.
2. Turn the printer off and then back on.
When using the printer as a remote printer
1. Install the network interface board.
2. Configure NetWare.
3. Start the print server.
- This procedure assumes an environment is already prepared for normal NetWare running the printing service setting.
- The procedure is explained with the following example settings:
  - File server name ...CAREE
  - Print server name ...PSERV
  - Printer name ...R-PRN
  - Queue name ...R-QUEUE