Skip header
ManualsContentsPreviousNextHelp

Quality Maintenance

Image Density

Adjusting the print image density can prevent faint spots or smears appearing on printed pages.

You can specify a density value between Minus6 and Plus3.

  • Denc. (Thick Ppr 2)

  • Denc. (Excl. Thick Ppr 2)

Note

  • Only change this setting from its default value if necessary.

  • For details about adjusting the print image density, see "Adjusting the Image Density", Hardware Guide.

Registration

You can adjust the starting position of the printing page.

  • Print Test Sheet

    You can print the registration test sheet.

    Tray1 to 3, Bypass Tray, Duplex.Unit

    Note

    • Only the installed trays appear on the display panel.

  • Adjustment

    You can select the start position for printing on a page.

    Horizontal: Tray 3, Horizontal: Bypass Tray, Horizontal: Duplex.Back

    Note

    • Only the installed trays appear on the display panel.

Curl Prevention

You can control the fuser temperature to prevent paper from curling.

Default: [Off]

  • On

  • Off

Note

  • Use this mode only when paper misfeed occurs frequently during duplex printing.