Quality Maintenance
Image Density
Adjusting the print image density can prevent faint spots or smears appearing on printed pages.
You can specify a density value between 
6 and 
3.
Denc. (Thick Ppr 2)
Denc. (Excl. Thick Ppr 2)
Only change this setting from its default value if necessary.
For details about adjusting the print image density, see "Adjusting the Image Density", Hardware Guide.
Registration
You can adjust the starting position of the printing page.
Print Test Sheet
You can print the registration test sheet.
Tray1 to 3, Bypass Tray, Duplex.Unit
Only the installed trays appear on the display panel.
Adjustment
You can select the start position for printing on a page.
Horizontal: Tray 3, Horizontal: Bypass Tray, Horizontal: Duplex.Back
Only the installed trays appear on the display panel.
Curl Prevention
You can control the fuser temperature to prevent paper from curling.
Default: [Off]
On
Off
Use this mode only when paper misfeed occurs frequently during duplex printing.
