Skip header
ManualsContentsPreviousNextHelp

Top Page > Hardware Guide > Replacing Consumables and Maintenance Kit > Replacing the Maintenance Kit > Replacing the Dustproof Filter

Replacing the Dustproof Filter

The dustproof filter is attached to the left side of the printer.

  1. Turn off the power, and then unplug the power cable.

  2. Use the grips on both sides to turn and then remove the dustproof filter cover.

    Dustproof filter illustration

  3. Attach the new dustproof filter cover to the printer.

    The dustproof filter is built into the filter cover.

    Dustproof filter illustration

  4. Plug in the power cable, and then turn on the power.

TopPreviousNext
Copyright (C) 2009