Skip headerPro 907/Pro 1107/Pro 1357
ManualsContentsPreviousNextHelp

When Using the Folding Unit Tray

Use the following procedure to attach the large Z-fold support tray for Folding Unit to the Folding Unit Tray.

If the paper fed to the output tray is still not aligned even with the large Z-fold support tray for Folding Unit attached, attach the small Z-fold support tray for Folding Unit as well.

  1. Open the front cover of the Folding Unit and remove the large Z-fold support tray (located at the bottom of the Folding Unit).

    Folding Unit illustration

  2. Position the large Z-fold support tray flush against the end fence in the slope of the Folding Unit Tray.

    Folding Unit Tray illustration

Note

Related topics

If the Paper Fed to the Output Tray Is Still Not Aligned