ManualsContentsPreviousNext |
You can change the zone to which the printer belongs under AppleTalk.
Confirm that a Macintosh and printer are connected with AppleTalk.
Open a Web browser.
Enter "http://(the printer's IP address or host name)/" in the address bar.
When entering an IPv4 address, do not begin segments with zeros. For example: If the address is
"192.168.001.010", you must enter it as "192.168.1.10" to connect to the printer.
The top page of Web Interface appears.
Click [Configurations/Jobs].
Enter "system" in the user name box and the password for printer settings in the password box, and then click [OK].
Click [Printer Settings].
Click [AppleTalk].
Enter the AppleTalk zone.
Click [OK].
The change made to AppleTalk Zone setting will becomes effective after the printer is restarted.