Skip headerPro 907/Pro 1107/Pro 1357
ManualsContentsPreviousNextHelp

Configuring the Port Settings

Use the following procedure to configure the port settings for the printer driver that is already installed.

  1. On the [Start] menu, click [Control Panel], and then click [Printers and Faxes] in the [Printers and Other Hardware] category.

    The [Printers and Faxes] window appears.

  2. Click the icon of the printer you want to use.

  3. On the [File] menu, click [Properties].

    The printer properties dialog box appears.

  4. Click the [Ports] tab, and then click [Configure Port...].

  5. Select [LPR] in the [Protocol] area, and then enter a virtual printer name in the [Queue Name] box under [LPR Setting].

    Specify the virtual printer name that matches the page description language you require:

    • PostScript: postscript

    • PCLXL: pclxl

    • PCL5e: vp-pcl

  6. Select the [LPR Byte Counting Enabled] check box, and then clear the [SNMP Status Enabled] check box.

  7. Click [OK].

  8. Click [Close].

Reference