dns

The following command displays current DNS settings:

msh> dns

The following command enables or disables the IPv4 DNS server address:

msh> dns "ID" server "server address"

The following command displays a configuration using the IP address 192.168.15.16 on a DNS 1 server:

msh> dns 1 server 192.168.15.16

• You can register IPv4 DNS Server address.

• You can select an ID number between 1 and 3. You can select up to three ID numbers.

• You cannot use "255.255.255.255" as the DNS server address.

The following command enables or disables the IPv6 DNS server address:

msh> dns "ID" server6 "server address"

• You can register IPv6 DNS Server address.

• The selectable ID number is between 1 and 3. You can select up to 3 ID.

msh> dns "interface_name" ddns {on|off}

• You can set the dynamic DNS function "active" or "inactive".

• {on} means "active" and {off} means "inactive".

msh> dns overlap {update|add}

• You can specify operations performed when records overlap.

• update: To delete old records and register new records.

• add: To add new records and store the old records.

• When CNAME overlaps, it is always changed, irrespective of settings.

msh> dns cname {on|off}

• You can specify whether to register CNAME.

• {on} means "active" and {off} means "inactive".

• The CNAME registered is the default name beginning with rnp. CNAME cannot be changed.

msh> dns arecord {dhcp|own}

• dhcp: You can specify the method of registering an A record when the dynamic DNS function is enabled and DHCP is used.

• own: To register an A record using the printer as the DNS client.

  The DNS server address and the domain name already designated are used for the registration.

msh> dns interval [1-255]

• You can specify the interval after which records are updated when using the dynamic DNS function.

• The updating interval is specified hourly. It can be entered between 1 and 255 hours.

• The default is 24 hours.

msh> dns resolv

msh> dns resolv protocol {ipv4|ipv6}

• Appears during dual stacking only.