Skip headerPro 907/Pro 1107/Pro 1357
ManualsContentsPreviousNextHelp

Top Page > Network and System Settings Guide > Monitoring and Configuring the Printer > Remote Maintenance by telnet > dhcp6

dhcp6

Use the "dhcp6"command to display or configure DHCPv6 settings.

View settings

The following command displays the current DHCPv6 settings.

msh> dhcp6

DHCPv6-lite configuration and display

msh> dhcp6 "interface_name" lite {on|off}

Viewing and specifying DNS server address selection (obtained from the dhcpv6 server/user specified value)

msh> dhcp6 dnsaddr {dhco|static}

DUID (DHCP unique ID) deletion and display

msh> dhcp6 duid clear

Viewing and specifying the time required to re-obtain the parameter obtained from dhcpv6

msh> dhcp6 option lifetime [0-65535]

  • It can be entered between 0 and 65535 minutes.

  • The default is 60 minutes.

  • If you specify "0", you cannot re-obtain the value.

TopPreviousNext
Copyright (C) 2010