Ethernet

This section lists the settings required for sending e-mail with an Ethernet connection.

Menu	User Tool	Setting Requirements
Interface Settings/Network	Machine IPv4 Address	Necessary
Interface Settings/Network	IPv4 Gateway Address	Necessary
Interface Settings/Network	Machine IPv6 Address	As required
Interface Settings/Network	IPv6 Gateway Address	As required
Interface Settings/Network	IPv6 Stateless Address Autoconfiguration	As required
Interface Settings/Network	DNS Configuration	As required
Interface Settings/Network	DDNS Configuration	As required
Interface Settings/Network	IPsec	As required
Interface Settings/Network	Domain Name	As required
Interface Settings/Network	WINS Configuration	As required
Interface Settings/Network	Effective Protocol	Necessary
Interface Settings/Network	Ethernet Speed	As required
Interface Settings/Network	IEEE 802.1X Authentication for Ethernet	As required
Interface Settings/Network	Permit SNMPv3 Communication	As required
Interface Settings/Network	Permit SSL / TLS Communication	As required
Interface Settings/Network	Host Name	As required
E-mail Settings	SMTP Server	Necessary
E-mail Settings	SMTP Authentication	As required
E-mail Settings	POP before SMTP	As required
E-mail Settings	Reception Protocol	As required
E-mail Settings	POP3 / IMAP4 Settings	As required
E-mail Settings	Administrator's E-mail Address	As required
E-mail Settings	E-mail Communication Port	As required

For the Effective Protocol setting, check that the protocol you want to use is set to [Active].
When POP before SMTP is set to [On], also make settings for Reception Protocol and POP3 / IMAP4 Settings.
When setting POP before SMTP to [On], check POP3 port number in E-mail Communication Port.
For details about how to specify the settings, see "Interface Settings" and "E-mail Settings".