Specifications for the Main Unit

Console

• Printer Memory: 1 GB

• System Memory: 512 MB

160 GB

OPC drum

Dry electrostatic transfer system

Dry two-component magnetic brush development system

Heating roll pressure system

• 1200 dpi × 1200 dpi

• 600 dpi × 600 dpi

• 300 dpi × 300 dpi

360 seconds or less

PCL 5e/PCL 6, PostScript 3, PDF

TCP/IP, AppleTalk

• Gigabit Ethernet (10BASE-T/100BASE-TX/1000BASE-T)

• IEEE1284

Ethernet (10BASE-T/100BASE-TX)

• Tray 1: 8¹/₂ × 11

• Tray 2, 3:

  A3, B4 JIS, A4, A5, B5 JIS,

  12 × 18, 11 × 17, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₂ × 5¹/₂, 8¹/₄ × 13, 8 × 13, 7¹/₄ × 10¹/₂, 8K, 16K,

  8¹/₄ × 14, 8 × 10, 11 × 14, 13 × 18,

  SRA3, SRA4, 226 × 310 mm, 310 × 432 mm, custom size

• Duplex:

  A3, A4, A5, B4 JIS, B5 JIS,

  11 × 17, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 8 × 10, 7¹/₄ × 10¹/₂, 8¹/₂ × 5¹/₂, 8K, 16K,

  12 × 18, 11 × 14, 13 × 19¹/₅, 13 × 19, 13 × 18, SRA3, SRA4, 226 × 310 mm, 310 × 432 mm, custom size

• Tray 1 Tray 3: 52.0 216.0 g/m² (14 lb. Bond 80 lb. Cover)

• Duplex: 52.0 216.0 g/m² (14 lb. Bond 80 lb. Cover)

For details about and recommendations concerning thick paper, see “Thick Paper”.

• Type 1: 5.7 seconds or less

• Type 2: 5 seconds or less

• Type 3: 4.3 seconds or less

(A4, 8¹/₂ × 11, feeding from Tray 1)

• Type 1:

  90 prints/minute (A4, 8¹/₂ × 11)

• Type 2:

  110 prints/minute (A4, 8¹/₂ × 11)

• Type 3:

  135 prints/minute (A4, 8¹/₂ × 11)

• PCL 5e/PCL 6: 80 fonts

• PostScript, PDF: 136 fonts

• Tray 1 (Tandem tray): 2,200 sheets (1,100 sheets × 2)

• Tray 2 (550-sheet tray): 550 sheets

• Tray 3 (550-sheet tray): 550 sheets

208240 V, 50/60 Hz, 20 A or more

Please be sure to connect the power cord to a power source as above. For details about power source, see “Power Connection”.

• Main unit only

  	Type 1	Type 2	Type 3
  Warm-up	About 1.24 kW	About 1.36 kW	About 1.93 kW
  Stand-by	About 331 W	About 363 W	About 349 W
  During printing	About 1.73 kW	About 2.01 kW	About 2.31 kW
  Maximum	About 3.07 kW	About 3.15 kW	About 3.59 kW

• Complete system

  	Type 1	Type 2	Type 3
  Warm-up	About 1.38 kW	About 1.49 kW	About 2.04 kW
  Stand-by	About 435 W	About 478 W	About 549 W
  During printing	About 2.07 kW	About 2.33 kW	About 2.54 kW
  Maximum	About 3.16 kW	About 3.24 kW	About 3.69 kW

  The complete system consists of the main unit, decurler, optional attention light, optional finisher, optional interposer, optional wide LCT, and optional multi bypass tray.

870 × 860 × 1,356 mm, 34.3 × 33.9 × 53.4 inches

870 × 860 mm, 34.3 × 33.9 inches

• Sound power level:

  • Main unit only

    	Type 1	Type 2	Type 3
    Stand-by	Less than 59.1 dB (A)	Less than 61.5 dB (A)	Less than 61.7 db (A)
    Printing	Less than 73.7 dB (A)	Less than 75.8 dB (A)	Less than 77.4 db (A)

  • Complete System

    	Type 1	Type 2	Type 3
    Stand-by	Less than 59.6 dB (A)	Less than 61.2 dB (A)	Less than 61.3 dB (A)
    Printing	Less than 75.8 dB (A)	Less than 76.1 dB (A)	Less than 77.3 dB (A)

• Sound pressure level:

  • Main unit only

    	Type 1	Type 2	Type 3
    Stand-by	Less than 45.5 dB (A)	Less than 46.9 dB (A)	Less than 47.0 dB (A)
    Printing	Less than 58.7 dB (A)	Less than 60.9 dB (A)	Less than 62.8 dB (A)

  • Complete system

    	Type 1	Type 2	Type 3
    Stand-by	Less than 45.0 dB (A)	Less than 45.8 dB (A)	Less than 46.0 dB (A)
    Printing	Less than 61.1 dB (A)	Less than 61.3 dB (A)	Less than 62.7 dB (A)

    • Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.

    • Sound pressure level is measured from the position of the operator.

    • The complete system consists of the main unit, decurler, optional booklet finisher, and optional wide LCT.

Max. 290 kg, 639.4 lb.