When Memory Is Full
This section describes likely causes of and possible solutions for problems related to full memory.
Message |
Cause |
Solution |
|---|---|---|
“Memory is full. nn originals have been scanned. Press [Print] to copy scanned originals. Do not remove remaining originals.” "n" in the message represents a changeable number. |
The scanned originals exceeds the number of pages that can be stored in memory. |
Press [Print] to copy scanned originals and cancel the scanning data. Press [Stop] to cancel the scanning data and not copy. |
“Press [Continue] to scan and copy remaining originals.” |
After printing scanned originals, the machine checks if there are remaining originals to be copied. |
To continue copying, remove all copies, and then press [Continue]. To stop copying, press [Stop]. |
Message |
Cause |
Solution |
|---|---|---|
“Sub-machine memory is full. Sub-machine will be disconnected.” |
The quantity of data exceeds the capacity of the sub-machine. |
Continue printing on the main machine. |
Even if the machine's memory becomes full, the memory overflow message will not appear if [Memory Full Auto Scan Restart] is set to [On] in [Input / Output] under [Copier / Document Server Features]. Instead, the machine will copy scanned originals and then automatically begin copying any remaining originals. When the machine does this, the resulting pages will not be in order. For details about Memory Full Auto Scan Restart, see "Copier/Document Server Features", Copy and Document Server Reference
.
