Skip header
 

Registering Frequently Used Functions

You can store frequently used copy job settings in the machine memory and recall them for future use.

You can store up to 25 programs.

Note

  • When a specified program is registered as the default, its values become the default settings, which are displayed without pressing the [Program] key, when modes are cleared or reset, and after the operation switch is turned on. See “Registering the Initial Display's Default Functions”.

  • Paper settings are stored based on paper size. So if you place more than one paper tray of the same size, the paper tray prioritized under System Settings in User Tools will be selected first. For details, see “System Settings”, Network and System Settings GuideIllustration indicating instructions stored on a CD-ROM.

  • Programs are not deleted by turning the power off or by pressing the [Clear Modes] key.