Reproduction Ratio
This section describes the user tools in the Reproduction Ratio menu under Copier / Document Server Features.
Default settings are shown in bold type.
Shortcut Reduce/Enlarge
You can register up to two frequently used Reduce/Enlarge ratios other than the fixed Reduce/Enlarge ratio and have them shown on the initial display.
You can also change registered Reduce/Enlarge ratios.
When you select [User Reduce/Enlarge Ratio], the ratio can be set from 25.0 to 400.0%, using the number keys.
The default setting for “F1” is 71% (Metric version) / 73% (Inch version).
The default setting for “F2” is 141% (Metric version) / 129% (Inch version).
The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.
Reproduction Ratio
You can specify the enlargement and reduction ratios that appear if [Reduce / Enlarge] is pressed on the copier screen.
Metric version
25%
A3
A5, 8 × 13 A5 (50%)A3
8 × 13 (65%)A3
A4, A4 A5 (71%)B4 JIS
8 × 13 (75%)8 × 13
A4, B4 JIS A4 (82%)93%
B4 JIS
A3 (115%)8 × 13
A3, A4 B4 JIS (122%)A4
A3, A5 A4 (141%)A5
A3 (200%)400%
User Reduce/Enlarge Ratio (25-400%)
Inch version
25%
11 × 17
51/2 × 81/2 (50%)11 × 17
81/2 × 11 (65%)11 × 15
81/2 × 11 (73%)81/2 × 14
81/2 × 11 (78%)81/2 × 13
81/2 × 11 (85%)93%
81/2 × 14
11 × 17 (121%)81/2 × 11
11 × 17 (129%)51/2 × 8 1/2
81/2 × 14 (155%)51/2 × 8 1/2
11 × 17 (200%)400%
User Reduce/Enlarge Ratio (25-400%)
The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.
Reduce/Enlarge Ratio Priority
You can set the ratio with priority when [Reduce / Enlarge] is pressed.
The default setting is 71% (Metric version) / 65% (Inch version).
The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.
Ratio for Create Margin
You can set a Reduce/Enlarge ratio when registering Create Margin in a shortcut key.
Enter a ratio using number keys (in the range of 90 to 99%).
The default setting is 93%.
The main machine applies the setting that has been made on it. Sub-machine settings do not affect connect copy.
