Skip header
 

Letter Fold-out

Applies two folds to create three equal panels (first panel folding inward, last panel folding outward).

Illustration of Letter Fold-out

1Press [Output/Customize Function/Finisher].

Operation panel screen illustration

2Press [Fold].

3Press [Letter Fold-out].

Operation panel screen illustration

4Press [Change].

5Select Fold Orientation, Open Orientation, and Multi-sheet Fold.

Operation panel screen illustration

6Press [OK] twice.

7Place the originals, and then press the [Start] key.

Note

  • Letter Fold-out documents are delivered to the Multi-Folding Unit only.

  • The Multi-sheet Fold function can fold a maximum of three sheets at a time.

  • When you enable the Multi-sheet Fold function (by setting it to [On]), the Sort function is automatically applied also. However, the Mixed Sizes function is not available while the Multi-sheet Fold function is enabled.

  • If the Booklet or Magazine function is set, the settings for those functions have priority.

  • The following copier functions are not available when the Letter Fold-out function is enabled:

    • Punch

    • Staple

    • Ring binding

    • Perfect binding

    • Eject copies to Stacker

  • The following paper types cannot be used with the Letter Fold-out function:

    • Letterhead

    • Cardstock

    • OHP transparencies

    • Tab stock

    • Translucent paper

    • Label paper

    • Coated paper (Multi-sheet Fold only)

  • For details about which sizes and weights that can be folded, see “Appendix”, About This MachineIllustration indicating book format instructionsIllustration indicating instructions stored on a CD-ROM.

  • The printed side of the paper may occasionally be scratched or stained with toner depending on the paper and the conditions of the machine's environment.