Skip header
 

Loading Tab Stock in the Multi Bypass Tray (Tray 7)

Loading tab stock in the multi bypass tray.

Important

  • Before using this function, set the tray for tab stock and set the position of the index tab under Paper Type in User Tools. For details about Paper Type, see “Tray Paper Settings”, Network and System Settings GuideIllustration indicating instructions stored on a CD-ROM.

  • The Duplex function cannot be performed on tab stock. If [1 Sided 2 Sided] is selected, cancel the setting.

Tab stock is fed starting from the top tab.

Illustration of loading tab stock

  1. Originals

  2. Tab Stock

  3. Copies

1Set the tab stock in the multi bypass tray (Tray 7), and fit the side fences to the tab stock pinching it.

Multi bypass tray illustration

  1. Side fences

  2. End fence

2Attach the back fence to the end fence, and then set the end fence.

Back fence illustration

  1. Back fence

3Press the elevator switch on the multi bypass tray (Tray 7).

4Select the multi bypass tray (Tray 7) on the control panel.

5Press the [Sharp] key.

6Press [Tab Stock].

7Specify the shift value using [] or [] under Tab Position Shift.

8Select [On] under Number of Tab Stocks, use the number keys to specify the tab stock value, and then press [Sharp].

9Specify the paper size, and then press [OK].

10Place the originals, and then press the [Start] key.

Note

  • For details about how to load tab stock in paper trays, see “Copying onto Tab Stock”.