Skip header
 

Copying onto Regular Size Paper

Makes copies onto regular size paper from the multi bypass tray.

1Set the side fences to the paper size.

2Place paper in the multi bypass tray (Tray 7), and then set the side fences to the paper size.

3Set the end fence, and then press the elevator switch on the multi bypass tray (Tray 7).

4Select the multi bypass tray (Tray 7) on the control panel.

5Press the [Sharp] key.

6Press [Select Regular Size].

Operation panel screen illustration

7Select the paper size.

Operation panel screen illustration

8Press [OK] twice.

9Place the originals, and then press the [Start] key.