Skip headerimage
ManualsContentsPreviousNextHelp

Removing Jammed Paper

This section describes how to locate and remove jammed paper.

CAUTION


  • The inside of the machine could be very hot. Do not touch any parts other than specified in this document when removing misfed paper. Otherwise, it may cause burn injury.

CAUTION


  • The fusing section of this machine might be very hot. Caution should be taken when removing misfed paper.

CAUTION


  • Keep your hands clear of the booklet finisher tray when pulling out or pushing in the finisher's staple unit. You can trap your fingers if you do not.

CAUTION


  • Keep your hands clear of the perfect binder and paper exit. You can trap your fingers if you do not.

CAUTION


  • Keep your hands clear of the inside of the ring binder and the space under the Ring Binder Tray. You might trap your fingers if you do not.

Important

Related topics

Locating Jammed Paper
Removing Jammed Paper
When A is Displayed
When B1 is Displayed
When B4 is Displayed
When C is Displayed
When D is Displayed
When K1 - K4 is Displayed
When L1 - L5 is Displayed
When Mc1 - Mc4 is Displayed
When Mc5 or Mc6 is Displayed
When Mc7 or Mc8 is Displayed
When Mk1 or Mk2 is Displayed
When Mk3 - Mk5 is Displayed
When Mk6 is Displayed
When Mk7 or Mk8 is Displayed
When Mk9 - Mk11 is Displayed
When Mk12 - Mk14 is Displayed
When N1 - N5 is Displayed
When N6 - N22 is Displayed
When P1 is Displayed
When P2 is Displayed
When Q1 or Q2 is Displayed
When Q3 or Q4 is Displayed
When R1 - R3 is Displayed
When R4 - R8 is Displayed
When Rb1 - Rb5 is Displayed
When Rb6 - Rb9 is Displayed
When Rb10 - Rb17 is Displayed
When Rt1 or Rt2 is Displayed
When U is Displayed (when the Large Capacity Tray is installed)
When U is Displayed (when the Wide Large Capacity Tray is installed)
When V is Displayed
When Z1 is Displayed
When Z4 is Displayed