![]() ![]() ![]() | ![]() | ![]() | |
![]() | |||
![]() | |||
![]() | ![]() | ![]() | ![]() |
![]() | ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() | ![]() ![]() ![]() |
The specified staple position varies depending on paper size, type, quantity and feed orientation. The following table shows staple positions:
When center staple is set, the fore edge of prints can be cut using the Trimmer. For details about cutting the fore edges of prints, see the printer driver Help.
Empty the Trimmer tray if prints are ejected with waste paper stuck to them. For details, see Removing Waste Paper, Troubleshooting.
Stapling might not be in the specified position if combine (layout) and duplex printing are both selected. After setting the staple position, use the printer driver's preview icon to check the position before printing.
For paper sizes and maximum numbers of sheets available for stapling, see "Appendix", About This Machine.
For printing methods, see the printer driver Help.