Skip headerGelSprinter GX e2600/GX e3300N/GX e3350N
ContentsPreviousNextHelp

Top Page > Troubleshooting > Status Monitor Errors > Cover Open

Cover Open

A cover is open. Make sure all covers are fully closed.

If the cover is already closed, open and then reclose it.

Follow the procedure below to close the cover.

  1. Close the cover.

    Top cover

    printer body illustration

    Left cover

    printer body illustration

    Duplex unit cover

    Duplex Unit illustration

    If the bypass tray is attached to the printer, switch the printer off and detach the bypass tray.

    Check that the duplex unit is correctly attached and the duplex unit cover is closed.

    The GX e2600 is not equipped with a duplex unit.

    Rear Cover

    Rear Cover illustration

    Only the GX e2600 has a rear cover.

Note

Reference

TopPreviousNext
Copyright (C) 2008,2009