Removing Paper Jammed in Tray 1

Follow the procedure below to remove paper jammed in tray 1.

You can feed the jammed paper to output ramp by opening the left cover and turning the paper feed wheel.

printer body illustration

If turning the paper wheel does not remove the jammed paper, use the following procedure to remove it:

Hold the grip on tray 1, lift the tray slightly (), and then pull it out ().
Pull tray 1 completely out. Take care not to drop it.
Open the output ramp.
Remove jammed paper.
If you cannot remove the jammed paper or it is difficult to remove, the paper may be jammed inside the printer. Examine the paper carefully and remove.
Close the output ramp.
Push tray 1 gently in until it stops.
Press the [Form Feed] key.
Printing starts.
Blank paper may be delivered after printing resumes.