Skip headerGelSprinter GX e2600/GX e3300N/GX e3350N
ContentsPreviousNextHelp

Using the Standard TCP/IP Port

This section explains how to install the printer driver (TCP/IP) and set up the Standard TCP/IP Port.

Important

  1. Start Windows, and then insert the provided CD-ROM into the CD-ROM drive.

    Quit all applications currently running.

  2. Select an interface language, and then click [OK].

  3. Click [Printer Driver].

    If your model is the GX e3350N, click [PCL/RPCS Raster Printer Drivers].

    The software license agreement appears in the [<License Agreement>] dialog box.

  4. Read the entire license agreement carefully. If you accept its terms, click [I accept the agreement.], and then click [Next >].

  5. Click [Connected via LAN].

  6. Double-click the printer name or click [+] to display the printer settings.

    The details shown in [Comment:], [Driver:], and [Port:] vary depending on the operating system, printer model, and port.

  7. Click [Port:], and then click [Add].

  8. Click [Standard TCP/IP], and then click [OK].

    Configure the Standard TCP/IP port settings, and then see Windows Help if [Standard TCP/IP Port] does not appear.

  9. Click [Next >] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.

  10. Enter the printer name or IP address in the [Printer Name or IP Address] box.

    The [Port Name] text box automatically obtains a port name. Change this name if necessary.

    When screen for Device selection appears, select "RICOH Network Printer C model".

  11. Click [Finish] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.

    The installation start dialog box reappears.

  12. Check that the port of the selected printer is displayed in [Port:].

  13. Configure the default printer as necessary.

  14. Click [Continue].

    The printer driver installation starts.

  15. Select whether or not to open the Status monitor automatically.

  16. Click [Next >].

  17. Click [Finish] in the installation completion dialog box.

    A message about restarting the computer may appear. Restart the computer to complete installation.

Note

Reference