Skip headerGelSprinter GX e2600/GX e3300N/GX e3350N
ContentsPreviousNextHelp

Top Page > Preparing for Printing > Specifying the Interface and Network Settings using the Printer's Control Panel (Host Interface Menu) > Changing the Host Interface Menu

Changing the Host Interface Menu

This section gives an example of changing a setting in the Host Interface menu.

  1. Press the [Menu] key.

    Menu key illustration

  2. Press the [Up arrow key] or [Down arrow key] key to display [Host Interface], and then press the [#Enter] key.

    Menu:               
    Host Interface      

  3. Press the [Up arrow key] or [Down arrow key] key to display [I/O Timeout], and then press the [#Enter] key.

    Host Interface:     
    I/O Timeout         

  4. Press the [Up arrow key] or [Down arrow key] key to display [20 seconds], and then press the [#Enter] key.

    I/O Timeout:        
    20 seconds          

    The [Host Interface] menu appears.

  5. Press the [Online] key.

    The initial screen appears.

TopPreviousNext
Copyright (C) 2008,2009