Skip headerGelSprinter GX e2600/GX e3300N/GX e3350N
ContentsPreviousNextHelp

Connecting the Printer via USB

  1. Make sure the printer is off.

    Do not turn the printer on until you have read how to do so.

    printer body illustration

  2. Turn on the power of the computer, and start Windows.

  3. Remove the seal on the USB slot located on the rear of the printer, and then insert the USB cable's hexagonal (type B) plug firmly into the slot.

    USB slot illustration

  4. Insert the USB cable's rectangular (type A) plug firmly into the computer's USB slot.

Note