Skip header
 

Setting a Password

Follow the procedure below to set a password.

1Start SmartDeviceMonitor for Admin.

2On the [Group] menu, point to [Search Device], and then click [IPv4], [IPX/SPX] or [IPv4 SNMPv3].

A list of machines using the selected protocol appears.

Select the protocol of the machine whose configuration you want to change.

If you are using IPv4 SNMPv3, enter the user authentication.

3In the list, select a machine whose configuration you want to change.

4On the [Tools] menu, click [NIB Setup Tool].

Application screen illustration

A Web browser opens and the dialog box for entering the login user name and password for the Web Image Monitor administrator appears.

NIB Setup Tool starts when the network interface board is default. Follow the instructions on the screen.

5Enter the login user name and password, and then click [Login].

For details about the user name and password, consult your network administrator.

6Click [Configuration].

7Click [Program/Change Administrator] on the [Device Settings] area, and then change the settings.

8Click [OK].

9Click [Logout].

10Quit Web Image Monitor.

11Quit SmartDeviceMonitor for Admin.

Note

  • For details about login user names and passwords, see Security Reference, which is the administrator's manual.