Skip header
 

Configuring the Energy Saver Mode

Follow the procedure below to configure Energy Saver mode.

1Start SmartDeviceMonitor for Admin.

2On the [Group] menu, point to [Search Device], and then click [IPv4], [IPX/SPX] or [IPv4 SNMPv3].

A list of machines using the selected protocol appears.

Select the protocol of the machine whose configuration you want to change.

If you are using IPv4 SNMPv3, enter the user authentication.

3Select the machine whose settings you want to make.

To make settings for all machines in the selected group, select no machine.

4Click the [Group] menu, point to [Energy Save Mode], [Set Individually], and then click [On].

Application screen illustration

To select all the machines in the group, select [Set By Group].

To disable Energy Save mode, click [Off].

5Quit SmartDeviceMonitor for Admin.

Note

  • For details about the setting for Energy Saver mode, see SmartDeviceMonitor for Admin Help.