Skip headerimage
ManualsContentsPreviousNextHelp

Using Connect Copy

You can select Connect Copy from either machine by pressing [Connect Copy].

The machine on which you pressed [Connect Copy] and made Connect Copy settings becomes the main machine, and the other the sub-machine.

Important

  1. Make sure "Ready" appears on the screen.

    Operation panel screen illustration

  2. Press [Connect Copy] on the machine that you want to use as the main.

    [Connect Copy] becomes highlighted, and the two machines are connected.

    • Main machine

      Operation panel screen illustration

    • Sub-machine

      Operation panel screen illustration

  3. Set the originals on the main machine.

  4. Make the necessary settings using the main machine.

    If you have made any copy settings before using Connect Copy, the settings remain effective. However, if the Finisher SR4030, SR4050 or Booklet Finisher SR4040, and Multi-Folding Unit are not installed on either one of the two, the Stack, Staple, Punch, Z-fold, Half Fold, Letter Fold-in, Letter Fold-out, Double Parallel Fold and Gate Fold functions are automatically disabled.

  5. Enter the number of copies with the number keys.

    The maximum copy quantity that can be set is 999.

  6. Press the [Start] key on the main machine.

    Copying starts if the main machine is not in use. The sub-machine starts copying after data transfer from the main machine is completed.

  7. Collect your copies from both the main and sub machines.

Note

Reference

Related topics

Order of Copy Output
Exiting Connect Copy
Printing Stored Documents Using Connect Print