Skip header
 

Top Page > Copy and Document Server Reference > Basic Copying > Finishing > Double Parallel Fold

Double Parallel Fold

Applies two parallel folds to create four panels (center line main fold, double panel fold).

Illustration of Double Parallel Fold

Important

  • You cannot use the bypass tray with this function.

1Press [Finishing].

Operation panel screen illustration

2Press [Fold].

3Press [Dble. Parallel Fold].

Operation panel screen illustration

4Press [Change].

5Select Fold Orientation, Open Orientation, and Print Side.

Operation panel screen illustration

6Press [OK] twice.

7Place the originals, and then press the [Start] key.

Note

  • Double Parallel Fold documents are delivered to the Multi-Folding Unit only.

  • If the Booklet or Magazine function is set, the settings for those functions have priority.

  • The following copier functions are not available when the Double Parallel Fold function is enabled:

    • Punch

    • Staple

    • Multi-sheet Fold

  • The following paper types cannot be used with the Double Parallel Fold function:

    • Letterhead

    • Cardstock

    • OHP transparencies

    • Tab stock

    • Translucent paper

    • Label paper

  • For details about which sizes and weights of paper that can be folded, see “Appendix”, About This MachineIllustration indicating book format instructionsIllustration indicating instructions stored on a CD-ROM.

  • The printed side of the paper may occasionally be scratched or stained with toner depending on the paper and the conditions of the machine's environment.