Skip header
 

Sample Copy

Use this function to check the copy settings before making a long copy run.

Important

  • This function only can be used when the Sort function is selected.

1Select Sort and any other necessary functions, and then place the originals.

2Press the [Sample Copy] key.

One copy set is delivered as a sample.

Sample Copy key illustration

3If the sample is acceptable, press [Continue].

The number of copies made is the number specified, minus one for the proof copy.

Note

  • If you press [Suspend] after checking the results, return to step 1 to adjust the copy settings as necessary. You can change the settings. However, depending on the combination of functions, you may not be able to change some settings.