System Menu Parameters
This section explains about parameters that can be set on the System menu.
Auto Continue
You can make the Auto Continue setting. When set to [On], printing continues in ten seconds if a system error occurs.
However, even if you set to [On] and certain errors occur, the current job may be canceled, and the printer automatically performs the next queued job.
Default: Off
Off
On
Copies
You can specify the number of pages to print.
This setting is disabled if the number of pages to print is specified by command or the printer driver.
1 - 999
Sub Paper Size
You can select [Off] or [Auto] to enable the Sub Paper Size function. When you select [Auto], the printer uses an alternative paper size if the currently specified paper is not loaded. When you select [Off], the printer uses any size paper in the currently specified paper tray.
This setting is effective only for jobs that use A4 or Letter size paper.
Default: Off
Off
Auto
Duplex
You can specify whether or not to print on both sides of a sheet.
Default: Off
Off
Short Edge Bind
Long Edge Bind
Blank Pages
You can specify whether or not to print blank pages.
When cover sheet printing is enabled from the printer driver, cover sheets are inserted even if you select [Do not print].
Default: Print
Print
Do not print
Energy Saver 1
You can specify whether or not to switch to Low Power Standby mode.
Low Power Standby mode lowers the fusing unit temperature.
When the printer switches to Low Power Standby mode, a message appears on the control panel, or the control panel indicators and display appear unlit. The Ethernet indicator remains lit.
Default: On
On
Off
Energy Saver 2
You can specify the number of minutes the Energy Saver mode is applied. The Energy Saver mode reduces electric power consumption.
E.Saver2 On/Off
You can specify whether or not to switch to the Energy Saver mode.
When the printer switches to Energy Saver mode, the indicators and panel display are unlit; however, the Ethernet indicator remains lit.
Default: On
On
Off
E. Saver2 Timer
Select the lead time needed to switch to Energy Saver mode.
Default: 15 minutes
5 minutes
15 minutes
30 minutes
60 minutes
B&W Page Detect
You can specify whether or not to recognize black-and-white images.
Use the black-and-white recognition function to print all monochrome pages in monochrome mode even if color printing is specified.
Default: On
On
Off
Auto Email Ntfy
You can specify whether or not to send an error message to a preset e-mail address when an error occurs in the printer.
Default: Off
On
Off
After changing the setting, turn off the power of the printer briefly, and then turn it on again.
For information, see Web Image Monitor Help.
System Defaults
You can return the printer settings to their factory-set defaults.
Print Error Pg.
You can specify whether or not to print error logs on the configuration page.
Default: Off
On
Off
Anti-Humidity
You can set the printer to produce prints in consistent quality even when humidity is high.
Default: Off
Off
Mode 1
Select this mode if printouts are blurred.
Mode 2
Select this mode if printouts are curled and/or blurred. Note that if you select this mode, the first print takes longer than subsequent prints to complete.
Mode 3
Select this mode if printouts are still curled and/or blurred even when prints are made in [Mode 2]. Note that this mode requires more time to produce the first print than [Mode 2].
