Skip header
 

Top Page > Software Guide > Making Printer Settings Using the Control Panel > System Menu > Changing the System Menu

Changing the System Menu

Use the following procedure to change the settings for Energy Saver timer.

1Press the [Menu] key.

image

The menu screen appears.

2Press [Up arrow key] or [Down arrow key] to display [System], and then press the [#Enter] key.

3Press [Up arrow key] or [Down arrow key] to display [Energy Saver 2], and then press the [#Enter] key.

4Press [Up arrow key] or [Down arrow key] to display [E. Saver2 Timer], and then press the [#Enter] key.

5Select the lead time needed to switch to the Energy Saver mode using [Up arrow key] or [Down arrow key].

6Press the [#Enter] key.

The selected lead time is displayed for two seconds with an asterisk, and then the [Energy Saver 2] screen appears.

7Press the [Menu] key to return to the initial screen.