When "Remove Misfeed Internal Path" Appears

"Remove Misfeed Internal Path" appears when a paper jam has occurred in the fusing unit.

Open the front cover and remove the paper.

Since the surrounding temperature is high around the guide, check for jammed paper when it gets a little cooler.

Pull Front Cover Open Lever, and then open the front cover with both hands carefully.
Lower the blue fusing unit levers, and pull out the jammed paper carefully.
Pull the paper downward to remove it. Do not pull it upward.
If it is difficult to locate the paper, check for jammed paper by pulling down the guide.
Close the front cover with both hands carefully.
- When closing the front cover, push the upper side of the cover firmly. After closing the cover, check that the error is cleared.