Using DHCP - Detecting the Network Address Automatically

When you use this printer in the DHCP environment, select [DHCP] following this procedure.
When [DHCP] is selected, you cannot make settings for the following items:
- IP Address
- Subnet Mask
- Gateway Address
Consult your network administrator for information about making network settings.

Press the [Menu] key.
Press the [] or [] key to display [Host Interface], and then press the [#Enter] key.

Menu: Host Interface
Press the [] or [] key to display [Network Setup], and then press the [#Enter] key.

Host Interface: Network Setup
Press the [] or [] key to display [DHCP], and then press the [#Enter] key.

Network Setup: DHCP
Press the [] or [] key to select [On], and then press the [#Enter] key.

DHCP: On

The address detected by the printer will appear.
Press the [Menu] key.
The initial screen appears.
Print a configuration page to confirm the settings made.
- For details about printing the configuration page using control panel, see Test Printing.