Skip header
 

Top Page > Hardware Guide > Removing Misfed Paper > When Paper is Jammed > When “Remove Misfeed Tray 1” Appears

When “Remove Misfeed Tray 1” Appears

”Remove Misfeed Tray 1” appears when a paper jam has occurred in Tray 1.

Open the front cover and remove the paper.

1Pull Front Cover Open Lever, and then open the front cover with both hands carefully.

image

2Carefully pull the jammed paper upward and out.

image

If paper has jammed inside the transfer unit, holding both sides of the paper, pull the paper carefully forward and out.

image

3Close the front cover with both hands carefully.

image

Note

  • Do not pull out the paper tray (Tray 1).

  • If paper is jammed in Tray 2, but it is difficult to locate, pull out Tray 2 to remove it. After removing the paper, carefully push Tray 2 all the way back inside the printer.

  • When closing the front cover, push the upper side of the cover firmly. After closing the cover, check that the error is cleared.