Checking the Status Information
Click the [Status] tab on the main page to display system information, paper tray status and toner levels.
Item |
Description |
|---|---|
Name |
Shows the name of the machine. |
Location |
Shows the location of the machine as registered on the [SNMP] page. |
Contact |
Shows the contact information of the machine as registered on the [SNMP] page. |
Host Name |
Shows the host name used with the current network protocol. |
Device Status |
Shows the current messages on the machine's display. |
Item |
Description |
|---|---|
Black Toner |
Shows the amount of black toner remaining. |
Magenta Toner |
Shows the amount of magenta toner remaining. |
Yellow Toner |
Shows the amount of yellow toner remaining. |
Cyan Toner |
Shows the amount of cyan toner remaining. |
Waste Toner Bottle |
Shows the amount of waste toner in the waste toner bottle, as “Status OK”, “Near Full” or “Full”. |
Item |
Description |
|---|---|
Tray 1 |
Shows the current state and paper size/type setting of tray 1. |
Tray 2 |
Shows the current state and paper size/type setting of tray 2. |
Bypass Tray |
Shows the current state and paper size/type setting of the bypass tray. |
The information about tray 2 appears only when it is installed.
If non-genuine print cartridges are installed, toner life cannot be reliably indicated.
For details about location and contact information, see Configuring the SNMP Settings
.
